There has never been a better time to think Australian. Well over 50% of Tindo Solar business is derived from customer referrals who are satisfied with Tindo Solar’s sensible, future proofed solar solutions and quality installation work.

The 25-year Tindo Solar manufacturer’s warranty is second to none. Solar and Battery Services Pty Ltd, as the authorised resellers of Tindo Solar, provide direct supply and support from factory to you, from Ballina to Hervey Bay.

Solar and Battery Services Pty. Ltd. look forward to providing you excellent service.

About Tindo Solar Panels

At the heart of the Tindo Karra photo-voltaic module is brilliant technical and intelligent design fused with a range of innovative materials that make it the ultimate solar panel.

Tindo Solar’s new Tindo Karra-315W PERC monocrystalline allows Tindo to fit more power into less space for a comparable price.

The development and testing of this module has been in the making for some time now with the participation of the Australian National University in Canberra.

Tindo Solar Panels

Everyone needs a solar panel this advanced!

The Tindo Karra-315W PERC MONO solar panels are manufactured in Australia at Tindo Solar’s Mawson Lakes manufacturing facility. We openly invite industry and prospective clients to book a time to visit the Tindo Solar factory to watch Tindo Solar panels being created.

You will love the Tindo Karra, the most beautiful solar panel … in the world. We have designed and are manufacturing a module without compromise.

Tindo Solar partners are global solar industry leaders who zealously value their fine reputations. Tindo Solar is proud to be associated with them.

Enquire about Australian made Solar Panels now!

    Tindo’s Production Line

    Tindo operates a state of the art 60MW capacity production line in Adelaide South Australia. The line is fully automated with a focus on quality control and sophisticated engineering.

    Bridgestone EVA

    EVA from Bridgestone has a long history in the solar panel industry providing encapsulation material of the highest quality. Bridgestone’s EVA is optically clear, impervious to water and can be relied on for decades.

    Dow Corning Silicone

    Silicone edge seal from Dow Corning has been a performer of the highest calibre, proven since panels were first commercialised. Tests show the seal outperforms all competition in cohesiveness and lap shear strength.

    DuPont Back Sheet

    Tindo uses DuPont Tedlar film-based backsheets in the manufacture of the Karra-315. Back sheets are used as a vapour barrier and to protect sensitive components of the panels. Tedlar is the only film based back sheet that has successfully protected solar panels for more than 25 years.

    Commitment to Quality

    Tindo Solar are committed to providing an Australian product that can be benchmarked against any panel in the world. Tindo have taken extensive steps to ensure the quality and reliability of Tindo panels. Tindo is Made for Life.

    Electroluminescence Testing

    Visual testing of the surface of solar panels does not provide adequate assurance of the quality of a module.

    There are numerous defects in a solar cell for example:

    • cracks caused during production or transportation of solar cells,

    • fingerprints that were left behind on cells while printing the cell grid,

    • micro cracks caused by heat stress while stringing,

    • cracks caused by faulty handling in the module production line,

    • defect contact point between ribbons and cells

    All of these defects can cause substantial reduction of the quality of modules. Though modules may generate adequate output immediately after they have been produced, cracks can at a later point in time (even years later) be the reason for substantial output reductions or loss of production.

    Tindo uses an Electroluminescence (EL) Tester on each panel that Tindo produce. This provides a reliable quality control system for solar panels in which all defects are detected so you as the end consumer can be assured of output from your panels well into the future.

    Flash Testing

    As part of the final step of the production process, each Tindo panel is Flash tested.

    During a flash test the panel is exposed to a flash of light from a xenon filled arc lamp. The output spectrum of this lamp is as close to the spectrum of the sun as possible. The output from this flash test is validated to ensure that the solar panel is performing as rated to its specifications.

    Tindo Solar will only send the panel out to the consumer if satisfied that the panel produces as its nameplate suggest.

    Visual Inspection

    Tindo Solar have numerous visual inspection points to ensure that the Tindo panels are made for life.

    These include:

    • Inspection to ensure the there are no air bubbles or blisters in the lamination process

    • Junction box has been sealed correctly to the back of the module.

    • Framing has formed a water tight seal to protect the cells

    The Tindo Promise

    Tindo Karra solar modules give you a minimum of 25 years of long-term high performance thanks to Tindo Solar’s premium quality.

    Tindo’s performance has undisputedly outperformed the competition on durability hence Tindo want “Australian Made” to stand for something!

    After 8 years of production, Tindo’s installed module fleet failure rate is some 200 x lower than competitors, hence why Tindo have increased the product warranty from 10 to 25 years.

    The Tindo Solar warranty is exceptionally customer-friendly, easy to understand and offer long-term security.

    Why work with us?


    Solar and Battery Services Pty Ltd

    Depot A: 3/51 Overlord Place Acacia Ridge

    Depot B: 6/74 Centennial Court Byron Bay

    ph: 07 3548 8921

    e: admin@iesmail.com.au

    Calculate Your Solar Savings!